Mike installing R30 insulation in the laundry room floor
Copper plumbing showing feed to laundry room and to main sink (to the right)
Frank shimming the addition back wall
Joe sorting out his copper fittings after finishing the rough plumbing
Frank nailing down the laundry room flooring
Mike rips a piece of flooring for the laundry room
Laundry room floor glued and nailed in place
Finished shimmed wall - the wall was 2 3/4 in out of plumb (the old part of the house was quite crooked).
Dryer vent plugged up (my handiwork). Mike will fix the siding. A new hole will be drilled to fit the new dryer such that the new dryer can be pushed flush to the back wall (i.e. no dryer vent hose needed)
